 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C4400 Typical Applications Base Stations Test Equipment Synthesizers Digital Switching OCXO Features 4-Pin Dip Surface Mount Package Optional Fast Warm-up TCXO Replacement for better short term stability 4887, TQDILOC, OC-400 Previous Vectron Model Numbers Frequency range Standard frequencies 10 MHz - 160 MHz 10; 12, 12.8, 16.384, 19.44, 20, 38.88, 51.84, 133Mhz Frequency stabilities1 [AT-Cut Crystal - Standard - 10 to 160MHz] Parameter vs. operating temperature range (Referenced to +25C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year Warm-up Time Min -100 -250 -250 Min -0.5 -10 -10 -10 -300 -500 Typ Max. +100 +250 +250 Max. +0.5 +10 +10 +10 +300 +500 2 Units ppb ppb ppb Units ppm ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 ... +70C D107 -20 ... +70C D257 -40... +85C F257 Condition at time of shipment, nominal EFC VS 5% Load 5% after 30 days of operation 60MHz; after 30 days of operation >60MHz; after 30 days of operation to 100ppb of final frequency (1 hour reading) @ +25C Typ Frequency stabilities1 [SC Cut Crystal - Option - 10 to 52MHz] Parameter vs. operating temperature range (Referenced to +25C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year Warm-up Time Min -10 -25 -50 Min -0.2 -10 -10 -5 -100 -500 Typ Max. +10 +25 +50 Max. +0.2 +10 +10 +5 +100 +500 2 Units ppb ppb ppb Units ppm ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 ... +70C D108 -20 ... +70C D258 -40... +85C F508 Condition at time of shipment, nominal EFC VS 5% Load 5% after 30 days of operation 60MHz; after 30 days of operation >60MHz; after 30 days of operation to 100ppb of final frequency (1 hour reading) @ +25C Typ Supply voltage (Vs) Parameter Supply voltage [Standard] Supply voltage [Option] Supply voltage [Option] Power consumption Min 4.75 11.4 3.135 Typ 5 12.0 3.3 Max. 5.25 12.6 3.465 2.5 1.0 Units VDC VDC VDC Watts Watts Condition Ordering Code SV050 SV120 SV033 during warm-up steady state @ +25C Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-21 * page 1 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4400 RF output Parameter Signal [Standard] Load Signal Level (Vol) Signal Level (Voh) Duty cycle Min Typ HCMOS 15 0.5 0.3 3.7 2.4 45 55 pF VDC VDC VDC VDC % Max. Units Condition OCXO Ordering Code RFH with Vs=12.0V or 5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=12.0V or 5.0V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 Frequency Tuning (EFC) 10 to 80MHz Parameter Tuning Range Tuning Range Linearity Tuning Slope Control Voltage Range Control Voltage Range 0 0.0 2 1.4 Positive 4 2.8 VDC VDC with Vs=12.0V or 5.0V with Vs=3.3V Min 5.0 1.0 Typ Max. 12 3 5 Units ppm ppm % Condition with AT cut Crystal with SC cut Crystal Additional parameters Parameter 3 Phase Noise Min Max. -65 -95 -120 -140 -145 8.0 Handling & processing note Typ Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 1 10 100 1 10 Condition Hz Hz Hz kHz kHz @ 10 MHz Weight Processing & Packing Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Typ Max. 7.0 28 7.0 50 +85 +125 Units V V V pF C C Condition with Vs=5.0VDC with Vs=12VDC with Vs=3.3VDC Output Load Operable temperature range Storage temperature range -55 -55 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-21 * page 2 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4400 Enclosures OCXO Type B Type A Package Codes: Code A1 A2 Height "H" 9.3 8.3 Pin Length "L" 5.85min. 5.85min. Code B1 Height "H" 10.4 Pin Length "L" NA 18.48 10.81 "H" MAX 15.24 1 7 12.70 14 8 2.5 2.5 20.32 Dimensions: mm Dimensions: Imm Pin Connections 1 7 8 14 Electrical Frequency Adjust Input (EFC) Ground (Case) RF Output Supply Voltage Input Pin Connections 1 Electrical Frequency Adjust Input (EFC) 7 Ground (Case) 8 RF Output 14 Supply Voltage Input Standard Shipping Method (For Type B Enclosures) A X B P K *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Type B 44 Quantity per meter 50 Quantity per reel 300 Dimension P 20 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-21 * page 3 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4400 Recommended Reflow Profile OCXO tp Tp Ramp up Ts Critical Zone TL to Tp TL Temperature tL Ramp dow n Ts ts preheat 25 t 25C to peak Time Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Ts min) -Temperature Min Ts max ) -Time (min to max) (ts) Ts max to TL - Ramp-up Rate Time maintainted above - Temperature (TL) - Time (tL) Peak Temperature (Tp) Time within 5C of actual Peak Temperature (tp) Ramp-down Rate Time 25C to Peak Temperature Pb-Free Assembly/Sn-Pb Assembly 3C/second max. 150c 200c 60-180 seconds 3C/second max. 217C 60-150 seconds max 260C 20-40 seconds 6C/second max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-21 * page 4 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4400 How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model C4400 Example : C4400 D207 SV050 OCXO Stability Code Supply Voltage Code RF Output Code RFH RFH Package Code Frequency A1 10.000 Mhz Step 2 The factory representative will then respond with a Vectron Model Number in the following configuration: Model C4400 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number] Typical P/N = C4400A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-21 * page 5 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax |
Price & Availability of C4400
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |